tech specs

 General
Schleifenbauer PDUs (Power Distribution Units) are power strips for data centre purposes. It is a  100% Dutch product that is exclusively produced along customers specifications. PDUs can be configured for both 16A and 32A , in single phase and three phase systems. The PDUs can be monitored locally (LCD display) and remotely using the Schleifenbauer Gateway. (Download available on this page )
   Profile
Material 100% anodised aluminium.
Colour and print
 Black with laser engraving
Dimensions width 65mm (1,5 U), depth 52,6 mm
Form factor 19” single  19” double ( outlets on rear side )
  half 19” single (2 PDUs next to each other on 19” )  half 19” double
  Vertical up to 2300 mm
   Outlets
 Outlets, type

C13

IEC 60320 C13

C19

IEC 60320 C19

Schuko

CEE 7/4

Schuko

FR CEE 7/5

BS

BS 1363

CEE 16A

IEC 60309

Wieland
GST18/3
  Exit leads with CEE connectors 16A/32A  single phase and threephase
 Outlets, amount depending on length of profile
   Power lead
  3G2,5 for 1 phase 16A  3G6 for 1 phase 32A
  5G2,5 for 3 phase 16A  5G6 for 3 phase 32A
Connection location
 Front                                                 Rear                                             Side cover
Connector Upon customer demand
   Display
Details

Graphical backlit LCD display. 4 orientations, user definable

Energy saver modus: Back-light time delay user definable

Information Measure values per phase,for total PDU and (optional) individual outlets: energy total in kWh,energy subtotal in kWh, current in A, voltage in V, power in VA, power factor in %, temperature in °C, (optional) status switchted outlet, name PDU, location PDU, free programmable ID PDU, address op data bus, serial number, part number, unieque ID PDU, firmware version of PDU.
   Input module
Details suitable for 16A/32A, single phase and three-phase
Energy consumption in operation 1 Watt (display off), 1,5 Watt (display on)
 measuring:  
Energy total kWh, non-resettable by user, <1% deviation
Energy subtotal kWh, resettable by user only via databus
Current Ampere RMS (apparent current), < 0,5% deviation
Current peak
 Ampère RMS, user definable peak time window: 50-2500 ms
Voltage Volt, < 0,5% deviation
Voltage dip
 Volt, user definable dip time window: 50-2500 ms
Power Apparent power in VA
Power factor Percentage 0,0 - 100,0 %
Temperature xx,x °C , optional through external temperature sensor. (± 2° C)
Accuracy energy measuring IEC 50470: 3 Klasse  C, +/- 1% accuracy
   Output module
Details 9 outlets each max 16A  (9 x single phase of 3 x L1, L2, L3)
Energy consumption in operation 1 Watt 
 measuring per outlet:
  
Energy total kWh, non-resettable by user, <1% deviation
Energy subtotal kWh, resettable by user only via databus
Current Ampere RMS (apparent current), < 0,5% deviation
Current peak
 Ampère RMS, user definable peak time window: 50-2500 ms
Voltage Volt, < 0,5% deviation
Voltage dip
 Volt, user definable dip time window: 50-2500 ms
Power Apparent power in VA
Power factor Percentage 0,0 - 100,0 %
Nauwkeurigheid energie-metingen IEC 50470: 3 Klasse  C, +/- 1% nauwkeurigheid
Max # modules per PDU 5 (45 outlets)
   Switch module
Details 9 outlets each max 16A  (9 x single phase of 3 x L1, L2, L3)
Energy consumption in operation 1  Watt
Type of relais Bi-stable, energy consumption nihil
Start up sequence and delay 3 sart-up modes: 0) manual: no automatic start-up  1) Sequential start-up with standard delay  2) individual delay per outlet. All delays are user definable. Protected against simultaneous start-up of all outlets
 Max # modules per PDU  5 (45 outlets)
   Certificates
   CE            
   RoHS  Restriction of Hazardous Substances
   WEEE  Waste Electrical and Electronic Equipment
   EN-60950  Low voltage certificate
   EN-61000  EMC, emission and immunity
 a.pdf download of this page is available in our dowload centre, under the support tab or via this link.